KSJR Series DC Output Motor Control (KSJR series Motor Control)

General parameters

Click the link below to download datasheet

KSJR_EN_V2.3_20240430.pdf

General Notes

1. Relay must be mounted to proper sized heat sink based on thermal curves. Thermal grease or a thermal pad must be used between relay. 

2. When connecting wiring to SSR please ensure screws are torqued down properly. Recommended torque for input screw is 4.43/(0.2-0.5) 

in-lb/N·m, output screw is (18-20)/(2.0-2.2) in-lb/N·m. 

3. When the operation temperature is above 25℃, please consider the derating as per the Thermal Derating Curve. 

4. Please ensure reliable grounding when using the SSR.

5. Control polarity must be observed. Otherwise, it may cause damage to the relay.

◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.