NEW | KSJD/KSJR Motor Reversing Module
KSJD/KSJR series products are DC motor reversing modules, panel mounted, with an interlock function, effectively preventing forward and reverse switches from being turned on simultaneously, dielectric strength at 2000VAC, with a strong anti-interference capability and high reliability. It is small size, simple to connect and easy to use.
Main Parameters
KSJD | KSJR | |
Outside Dimension | 58.4mm×45.7mm×46mm | 105mm×78mm×38mm |
Load Voltage | 30VDC | 30VDC |
Load Current | 10A | 40A / 60A / 75A |
| input voltage | 12VDC / 24VDC | 12VDC / 24VDC |
Inrush Current | 50A(10 ms) | 225A(10 ms) |
Maximum On Resistance | 14mΩ( @Ta=25℃) | 3mΩ( @Ta=25℃) |
Product function
When there is no input signal, output load is switched off; When there is input signal, DC load is connected.
Product Highlights
MOSFET Output
Low Impedance
Input with LED Indication
IP20 Protection Degree
Small Size (KSJD Series)
Application
Suitable for DC motor with forward and reverse control, such as solar tracker.
Application example
KSJD/KSJR integrates DC forward and reverse drive and interlock functions, which can effectively replace 4 SSRs to realize the forward and reverse control of DC motors, and can also be applied to the heating and cooling conversion control of semiconductor refrigeration chips. The comparison is shown in the following figure:
Single KSJD Diagram
4 pieces of SSR Diagram
